Shenzhen MaoTeWang Electronic Technology Co., Ltd.

overseas@v-t.net.cn

Home page

Middle Voltage 690V 1140V High-performance Universal Inverter

Product introduction

Product Overview

Item	Description
Product Name	Frequency Inverter/ AC Drive
Model Number	V5-H-6TxxxG, V5−H−BTxxxG
Power Range	15kW-710kW
Rated Input Voltage	3 phase 380V/480V
Rated Output Voltage	3 phase 0 to rated input voltage
Input Frequency	50Hz/60Hz
Applicable Motor	Asynchronous Motor
Control Mode	V/F Control, Vector Control, Sensor-less Vector Control, Vector Torque Control
Communication	Modbus 485 RTU
IP Class	Standard IP20
Overload Capacity	150% 1 minute, 180% 10 seconds, 200% 0.5 second, interval: 10 minutes (inverse time lag feature)

Medium Voltage Drives Feature

■ V&T Vector Torque Drive Higher saving-energy effect and Less reactive current

■ Outdoor digital control cabinet, thermostatic control cabinet suit ,high and low temperature ambient for long-term reliable work

■ Excellent control performance for open-loop vector control, accurate speed identification and rotor flux orientation, and torque can respond quickly and operate stably at 0.25hz load change

■ Excellent current and voltage control technology, repeatedly and alternately accelerated and decelerated with 0.1s instruction, and inverter operates stably ;

■ Wide voltage ;range, low voltage ;under fluctuated power, continuous working, strong adaptability

■ Convenient and continuous to adjust speed, perfect torque compensation function, normal to start motor with powerful power.

■ Mature power balance scheme can effectively solve power distribution in multi-point transmission.

■ The overload capacity can be optimized under low frequency.

■ Rich monitoring function, operation data can be recorded and saved by storage medium or wireless transmission.

Model Explanation

Product Catalogue

V5−H−6T□□□G ; 3 Phase 690V Constant Torque/Heavy-duty Applications

Power（kW）		15	18.5	22	30	37	45	55	75	90	110	132	160	185	200	220
Motor（kW）		15	18.5	22	30	37	45	55	75	90	110	132	160	185	200	220
Output	Voltage（V）	3 phase 0～Rated Voltage
	Rated Current（A）	20	25	28	35	45	52	65	86	98	120	150	176	204	220	245
	Overload capacity	150% 1min，180% 10 second， 200% 0.5 second，interval: 10 minutes (inverse time lag ;feature)
Input	Voltage/ frequency	3 phase 690V～790V；50Hz/60Hz
	Allowable voltage range	587V～793V；Voltage imbalance：≤3% ；allowable frequency fluctuation：±5%
	Rated Current（A)	25	30	35	40	47	52	65	85	96	116	145	168	196	210	230
*Braking unit		Built-in as standard							External braking unit needed
IP		IP20
Cooling mode		Forced air cooling
Power（kW）		250	280	315	355	400	450	500	560	630
Motor（kW）		250	280	315	355	400	450	500	560	630
Output	Voltage（V）	3 phase 0～Rated Voltage
	Rated Current（A）	275	325	350	395	435	490	545	600	680
	Overload capacity	150% 1min，180% 10 second， 200% ;0.5 second，interval: 10 minutes (inverse time lag ;feature)
Input	Voltage/ frequency	3 phase 690V～790V；50Hz/60Hz
	Allowable voltage range	587V～793V；Voltage imbalance：≤3% ；allowable frequency fluctuation：±5%
	Rated Current（A)	255	290	335	378	415	466	520	580	655
*Braking unit		External braking unit needed
IP		IP20
Cooling mode		Forced air cooling

V5−H−BT□□□G ; 3 Phase 1140V Constant Torque/Heavy-duty Applications

Power（kW）		37	45	55	75	90	110	132	160	185	200	220	250	280	315	355
Motor（kW）		37	45	55	75	90	110	132	160	185	200	220	250	280	315	355
Output	Voltage（V）	3 phase 0～Rated Voltage
	Rated Current（A）	25	31	38	52	58	73	86	104	115	132	144	162	180	208	225
	Overload capacity	150% 1 min，180% 10 second， 200% 0.5 second，interval: 10 minutes (inverse time lag ;feature)
Input	Voltage/ frequency	3 phase 1140V；50Hz/60Hz
	Allowable voltage range	960V～1300V；Voltage imbalance：≤3% ；allowable frequency fluctuation：±5%
	Rated Current（A)	27	32	38	51	57	72	85	102	113	126	141	158	180	200	215
IP		IP20
Cooling mode		Forced air cooling
Power（kW）		400	450	500	560	630	710
Motor（kW）		400	450	500	560	630	710
Output	Voltage（V）	3 phase 0～Rated Voltage
	Rated Current（A）	260	300	325	365	400	450
	Overload capacity	150% 1 min，180% 10 second， 200% 0.5 second，interval: 10 minutes (inverse time lag ;feature)
Input	Voltage/ frequency	3 phase 1140V；50Hz/60Hz
	Allowable voltage range	970V～1300V；Voltage imbalance：≤3% ；allowable frequency fluctuation：±5%
	Rated Current（A）	260	300	325	365	400	450
IP		IP20
Cooling mode		Forced air cooling

Technical Specification

Control characteristics	Control mode	Vector Control
	Starting torque	0.50Hz ;180%
	Speed regulation range	1:100
	Steady speed precision	± ;0.5%
Product functions	Key function	Under-voltage regulation, switchover of run command source(operation panel, terminal and communication), speed tracing function, multi− step frequency reference(up to 23 step frequency),S curve acceleration and deceleration, slip compensation, PID regulation, droop control, current limit, manual torque boost and auto torque boost,Multiple function input/output terminal.
	Frequency setting method	operation panel setting、terminal UP/DN、upper computer communication、analog AI1, analog AI2,analog AI3、pulse DI, etc.
	Frequency range	0.00～300.00Hz
	Starting frequency	0.00～60.00Hz
	Acceleration time and deceleration time	0.1～36000s
	Dynamic braking	Braking unit action voltage： AC690V： 800～1200V AC1140V：1700～2200V
	DC braking	DC braking start frequency：0.00～300.00Hz； DC braking current：0.0～120.0%； DC braking time：0.0～30.0s；DC braking function does not required waiting time to start ;to realize quick braking
	Magnetic flux braking	Enabled or disabled during deceleration are optional, the default setting is enabled
Unique functions	Multi-function M key	The unique multi-function key can be set to frequently used operations: such as JOG, emergency stop, switchover of run command source, switchover of parameters display mode, etc.
	Multiple parameter display modes	Basic parameters display mode, fast parameters display mode, non−factory setting parameters display mode.
	Parameters copy	The standard operation panel can realize the parameters upload, download and display the copy progress. Users can set to forbid overwriting the uploaded parameters
	Function code hiding	Customers can customize the display and hide of any function code group
	Dual 485 communication ports	Dual 485 communication ports support Modbus protocol (RTU). The maximum distance is 500 meters
	Operation panel	Key type operation panel, Protection level: IP20 as standard, IP54 as option
	Common DC bus	All series product support common DC bus
	Independent duct	All series product adopts independent duct design and supports the installation of heat-sink outside the cabinet
	Power-On-Self-Test (POST)	Realizing the POST of internal and peripheral circuits, including motor grounded, abnormal +10V power supply output, analog input and disconnection, etc.
Protection function	Power supply under-voltage, over-current protection, over-voltage protection, interference protection, abnormal comparison level, motor data identification ;failure, module(IPM) protection, heat-sink over temperature protection, inverter overload protection, motor overload protection, peripheral protection, abnormal current detection, output short circuit to ground, interruption of power supply when in running status, abnormal input power, output phase loss, abnormal EEPROM protection, abnormal pre-charging contactor detection, temperature sampling disconnection, abnormal +10V power supply, abnormal analog input, motor over temperature protection(PTC), abnormal communication, abnormal software version compatibility, abnormal copying, terminal mutual exclusion detection, hardware overload protection
Environment	Operating site	The product should be mounted vertically in the electric control cabinet with good ventilation. Horizontal or other installation modes are not allowed. The cooling medium is the air. The product should be installed in the environment without dust, corrosive gas, combustible gas, oil mist, steam, drip and free from direct sunlight.Please install it in a place where it cannot be severe vibration and shock, and the maximum amplitude does not exceed 5.8m/S2 (0.6g)
	Ambient temperature	−10 to +40ºC, the product must be de-rated rated output current for the ambient temperature between 40ºC to 50ºC, the rated output current must be de-rated for 1% per 1ºC temperature rise
	Humidity	5 to 95%, no condensing
	Altitude	0 to 2000m, the product must be de-rated rated output current for the altitude above 1000 meters, the rated output current must be de-rated for 1% per 100 meters rise
	Vibration	3.5mm, 2～9Hz；10 m/s2，9～200Hz；15 m/s2，200～500Hz
	Storage temperature	−40～+70℃

Function of Control Circuit Terminal

Installation Dimension

690V Voltage Class

V5−H−6T90G And below power class

V5−H−6T110G And above power class（accompany with pedestal )

V5−H−6T110G And above power class（no pedestal）

V5−H−6T Series Product Appearance,Installation Dimensions, Approximate Weight

Voltage	power（kW）	pedestal	Appearance size（mm）			Installation Dimensions（mm）					Weight（kg）
Voltage	power（kW）	pedestal	W	H	D	W1	H1	D1	T1	Hole d	Weight（kg）
690V	15～30	No	285	440	220	200	425	107.5	2.5	7	17
	37～55	No	315	575	227	220	553	123.5	2.5	10	25
	75～90	No	400	615	265	270	590	123.5	3.0	10	35
	110～132	yes	465	1042	325	382	339	238	—	14	—
	110～132	No	465	745	325	343	715	156	3.0	12	55
	160～220	yes	540	1206	385	459	365	300	—	14	—
	160～220	No	540	890	385	370	855	205.5	4.0	14	85
	250～355	yes	700	1380	385	614	412	294	—	15	—
	250～355	No	700	1010	385	520	977	210	4.0	14	125
	400～630	yes	810	1698	425	728	418	339	—	15	—
	400～630	No	810	1358	425	520	1300	210	4.0	14	215

Note: For 690V series inverters, air-cooled inverters are standard products, and explosion-proof inverters need to be customized according to customer needs. The installation dimensions of explosion-proof inverters can be flexibly changed according to customer requirements. If you have special needs, please contact our company R & D department. The company only provides explosion-proof inverter inner cores, and does not design and produce explosion-proof enclosures.

1140V Voltage Class

V5−H−BT37G～V5−H−BT250G power class ; V5−H−BT280G～V5−H−BT710G power class

V5−H−BT Appearance, Installation Size and Approximate Weight

Voltage	Power（kW）	Appearance, Installation Size（mm）							Weight （kg）
Voltage	Power（kW）	W	H	D	W1	H1	D1	d	Weight （kg）
1140V	37～132	590	1280	365	506	1255	271	14	80
	160～250	800	1700	450	716	1669	351	14	130
	280～500	1000	2552	800	880	2200	700	20	220
	560～710	1200	2552	800	1080	2200	700	20	250

Notes:

♦ For the 1140V series inverter, the air-cooled inverter is a standard product, and the explosion-proof inverter needs to be manufactured at client’s requirements. Explosion-proof inverter’s installation size, can be customized at client’s requirements. If you have any special requirements, please contact research and development department in company.

♦ Company only provide explosion-proof inverter and inner core, not produce explosion-proof enclosure.

Applications

Industrial Control Inverters Representative Industry

An ac drive is a device that is used to control the speed of an electric motor. The use of VFDs, also known as variable speed drives (VSD), is becoming common in operating motors used in heating, ventilating, and air conditioning (HVAC) systems within buildings. As an advanced Inverter Drive Manufacturer, The Middle Voltage High-performance Universal Inverter of Shenzhen V&T Technologies Co.,Ltd. are widely used in Fan, Pump, Oilfield,Inner Parts for Safety and Explosion-proof Machine ,Mining Winch,Coal Mine,Hoist,Municipal Engineering, Rubber and Plastics Machine.

Download

undefined

Middle Voltage 690V 1140V High-performance Universal Inverter

Product Model：

V5-H-6T and V5-H-BT medium voltage series are high-performance vector control inverter. The product adopts the open-loop vector control technology with the current international advanced technology, which has the same excellent control performance with the international high-end drive. It further strengthened the reliability and environmental adaptability of the product, as well as the customized and professional design. This greatly meet the needs of various transmission applications.

Categories：

690V V5/V9 Series Middle Voltage High Performance Universal Inverter

Keywords：

Download File：

overseas@v-t.net.cn

E-mail

+86 133 52902582